Bluestone
Round Bullnose
Bluestone Round Bullnose Coping features natural blue-grey tones, a sawn surface and a smoothly rounded front edge.
Made in China | Sawn finish |100% Natural Stone
COLOR
EDGE
Natural Split
FINISH
Sawn Finish
THICKNESS
SIZE
Production description
Bluestone Round Bullnose Coping features natural blue-grey tones, a sawn surface and a smoothly rounded front edge. The curved profile softens the appearance of pool edges and steps while complementing coordinating bluestone paving. Natural charcoal variation and mineral markings give each piece individual character within a consistent outdoor palette.
Natural basalt has individual mineral markings and changes in tone that become part of the finished design. Its restrained colour works particularly well with timber, concrete, render and planting. Blending pieces from several packs helps spread these characteristics evenly across the installation for a balanced overall appearance.
The rounded front edge creates a softer outline than a square profile. Consider how this curve will meet the adjacent paving, corners and changes in level. Review the available dimensions and plan the layout before ordering, allowing for cuts and the detailing required at returns and junctions.
Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.
Specs & Information
- Material: Natural basalt (bluestone)
- Format: Round bullnose coping
- Finish: Sawn
- Size options: 400 × 600 mm, 400 × 800 mm
- Thickness options: 30 mm
- Sales unit: Per piece
- Typical use: Pool perimeters and step edges, subject to project-specific detailing
- Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
- Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.
Installation
1. Check the perimeter
Dry-lay the coping, including corners and returns. Confirm dimensions, overhang, joint positions and the relationship to adjoining paving before fixing.
2. Prepare the support
The pool builder or installer should confirm the supporting structure, waterproofing, drainage detail and movement joints for the pool or step construction.
3. Select the fixing system
Use a stone-compatible adhesive or bedding system suitable for the location. Agree any pre-sealing treatment with the adhesive and sealer suppliers first.
4. Fix with full bedding
Support the complete bearing area and edges. Set a consistent line and level, allowing the specified joints; keep movement joints flexible rather than filling them with rigid grout.
5. Protect before use
Remove residue promptly and allow the system to cure. Apply a tested, pool-suitable sealer as specified. Avoid prolonged ponding and maintain pool water within the pool supplier’s recommendations.
Format & Sizing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

