Limestone
Belgium Blue Drop Edge
Belgium Blue Limestone Drop Edge Coping features rich blue-grey tones, natural markings and a honed finish.
Made in Turkey |Honed finish |100% Natural Stone
COLOR
EDGE
Honed
FINISH
Honed
THICKNESS
SIZE
Production description
Belgium Blue Limestone Drop Edge Coping features rich blue-grey tones, natural markings and a honed finish. The vertical drop profile creates a substantial edge for pools and steps. Pair it with Belgium Blue paving to maintain a consistent palette, or contrast its darker tones with lighter stone and garden planting.
Limestone brings a softer visual character to a landscape, with mineral markings and tonal differences that are part of the stone itself. Blend pieces from several packs during installation so these variations are distributed across the finished area rather than concentrated in one section.
The drop profile adds a vertical face to the edge detail, giving the finished surface a more substantial appearance. Plan the relationship between the coping, adjoining paving and any exposed structure before ordering. Check the selected dimensions and corner requirements so the pieces work with your project layout.
Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.
Specs & Information
- Material: Natural limestone
- Format: Drop-face / drop-edge coping
- Finish: Honed
- Size options: 300 × 600 mm, 400 × 800 mm
- Top thickness: 20 mm
- Drop-face depth: 50 mm
- Sales unit: Per piece
- Typical use: Pool perimeters and step edges, subject to project-specific detailing
- Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
- Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.
Installation
1. Check the perimeter
Dry-lay the coping, including corners and returns. Confirm dimensions, overhang, joint positions and the relationship to adjoining paving before fixing.
2. Prepare the support
The pool builder or installer should confirm the supporting structure, waterproofing, drainage detail and movement joints for the pool or step construction.
3. Select the fixing system
Use a stone-compatible adhesive or bedding system suitable for the location. Agree any pre-sealing treatment with the adhesive and sealer suppliers first.
4. Fix with full bedding
Support the complete bearing area and edges. Set a consistent line and level, allowing the specified joints; keep movement joints flexible rather than filling them with rigid grout.
5. Protect before use
Remove residue promptly and allow the system to cure. Apply a tested, pool-suitable sealer as specified. Avoid prolonged ponding and maintain pool water within the pool supplier’s recommendations.
Format & Sizing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.



