Travertine
Beige French Pattern
Mokka Travertine French Pattern combines warm brown, beige and earthy tones in a traditional mixed-size layout.
Made in Turkey ｜ Tumbled finish ｜100% Natural Stone
COLOR
EDGE
Honed
FINISH
Tumbled
THICKNESS
SIZE
Production description
Mokka Travertine French Pattern combines warm brown, beige and earthy tones in a traditional mixed-size layout. The tumbled finish adds soft edges and natural texture to patios, courtyards and alfresco areas. Its warm palette pairs well with timber and planting, with matching Mokka coping available for coordinated poolside detailing.
Travertine is valued for its layered mineral character, natural pores and gentle changes in tone. These features make every installation individual. View a sample alongside your other finishes, and blend pieces from several packs when laying to achieve a balanced distribution of colour and movement.
The French Pattern format combines several coordinated stone sizes rather than repeating a single tile. Plan the modular layout before installation and check the supplied sizes against your area. A considered setting-out plan helps maintain the pattern, balance perimeter cuts and make the most of the mixed-format design.
Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.
Specs & Information
- Material: Natural travertine
- Format: Multi-size French Pattern
- Finish: Tumbled
- Nominal module coverage: 0.75 m² per set; sold by m²
- Thickness options: 12mm
- Sales unit: m²
- Typical use: Patios, courtyards and landscape paving
- Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
- Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.
Installation
Format & Sizing
- Format: Multi-size French Pattern
- Nominal module coverage: 0.75 m² per set; sold by m²
- Thickness options: 12mm
- Sales unit: m²
Frequently Asked Questions
What is Mokka travertine French Pattern?
It is a coordinated mixed-size layout rather than a single repeating tile. The listed module covers about 0.75 m². Keep the supplied sizes together and follow the module plan; mixing unrelated tile sizes can interrupt the pattern.
Is French Pattern ordered by the set or by square metre?
This listing is sold by m²; the 0.75 m² figure describes nominal coverage of a pattern module. For a 15 m² area, the layout uses about 20 modules before cuts and waste. Confirm the pack increment before finalising the quantity.
Can the 12mm French Pattern be laid directly on sand?
Do not assume it can. The 12mm format needs a base and bedding system designed for that tile thickness and the intended loads. Have the installer specify the support and drainage before ordering, especially where it meets coping or door thresholds.
How do I avoid repeated patches of colour in the pattern?
Dry-lay a complete module, then draw stone from several packs as you repeat it. Spread strongly marked pieces across the area. Plan the first module and perimeter cuts before fixing so the layout remains balanced at walls and steps.
What should I check when pairing Mokka French Pattern with coping?
The catalogue includes Mokka straight tiles and drop-face coping. Check physical samples because this French Pattern is tumbled while the listed travertine coping is honed. Also allow for the difference between the 12 mm paving and the thicker coping top.
