Limestone
Belgium Blue Square Bevel Coping
Belgium Blue Limestone Square Bevel Coping features deep blue-grey tones and a honed finish.
Made in Turkey |Honed finish |100% Natural Stone
COLOR
EDGE
Honed
FINISH
Honed
THICKNESS
SIZE
Production description
Belgium Blue Limestone Square Bevel Coping features deep blue-grey tones and a honed finish. Its square profile and gently bevelled edge give pool surrounds and steps a clean, defined appearance. Pair it with coordinating Belgium Blue paving or lighter landscape materials, with natural stone variation adding understated detail.
Limestone brings a softer visual character to a landscape, with mineral markings and tonal differences that are part of the stone itself. Blend pieces from several packs during installation so these variations are distributed across the finished area rather than concentrated in one section.
The square profile and bevelled edge introduce a defined line that suits a clean architectural layout. Consider the alignment with adjoining paving and the treatment of corners, returns and changes in level. Check the available dimensions against your plans before ordering so the edge detail remains consistent.
Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.
Specs & Information
- Material: Natural limestone
- Format: Square bevel coping
- Finish: Honed
- Size options: 300 × 600 mm, 400 × 800 mm
- Thickness options: 30 mm
- Sales unit: Per piece
- Typical use: Pool perimeters and step edges, subject to project-specific detailing
- Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
- Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.
Installation
1. Check the perimeter
Dry-lay the coping, including corners and returns. Confirm dimensions, overhang, joint positions and the relationship to adjoining paving before fixing.
2. Prepare the support
The pool builder or installer should confirm the supporting structure, waterproofing, drainage detail and movement joints for the pool or step construction.
3. Select the fixing system
Use a stone-compatible adhesive or bedding system suitable for the location. Agree any pre-sealing treatment with the adhesive and sealer suppliers first.
4. Fix with full bedding
Support the complete bearing area and edges. Set a consistent line and level, allowing the specified joints; keep movement joints flexible rather than filling them with rigid grout.
5. Protect before use
Remove residue promptly and allow the system to cure. Apply a tested, pool-suitable sealer as specified. Avoid prolonged ponding and maintain pool water within the pool supplier’s recommendations.
Format & Sizing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.




