ORDER SAMPLES ONLINE FROM $15 DELIVERED

Travertine

Mokka

Mokka Travertine brings beige, mocha and earthy tones to outdoor spaces.

Made in Turkey | Tumbled finish |100% Natural Stone

COLOR

mokka travertine

EDGE

Tumbled

FINISH

Tumbled

THICKNESS

SIZE

Price range: $58.00 through $80.00 PER SQM
1 × $58.00
TOTAL PRICE
$58.00 INCL. GST

Production description

Mokka Travertine brings beige, mocha and earthy tones to outdoor spaces. A tumbled finish gives the stone softer edges and a naturally aged appearance for patios, courtyards and garden paths. Choose coordinating tiles, French Pattern or drop-face coping to carry its warm palette through your paving and poolside design.

Travertine is valued for its layered mineral character, natural pores and gentle changes in tone. These features make every installation individual. View a sample alongside your other finishes, and blend pieces from several packs when laying to achieve a balanced distribution of colour and movement.

Choose the available size and thickness to suit the layout and installation method. Larger pieces create fewer visible joints, while smaller formats can offer more flexibility around edges and changes in shape. Plan the setting-out lines, grout colour and perimeter cuts together to achieve a balanced finished surface.

Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.

Specs & Information
  • Material: Natural travertine
  • Format: Stone paving / tiles
  • Finish: Tumbled
  • Size options: 610 × 406 mm
  • Thickness options: 12 mm, 30 mm
  • Sales unit: m²
  • Typical use: Patios, courtyards and paths; suitability depends on finish, thickness and installation
  • Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
  • Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.

1. Check and plan
Inspect the stone before laying. Blend pieces from several packs and dry-lay a small area to check colour, joints and cuts.

2. Prepare the base
Have your installer provide a sound, clean base suited to the stone thickness and expected loads. Outdoor areas need drainage falls; thin tiles require a supported bonded installation.

3. Lay with full support
Use a stone-compatible adhesive or bedding system. Support the whole underside, including edges and corners; avoid isolated blobs. Check coverage by lifting an occasional piece.

4. Joint and clean
Allow the specified joints and movement joints. Grout with a compatible product and clean residue promptly. Follow the chosen system for any pre-grout sealing.

5. Cure and seal
Let the adhesive and grout cure before use. Test a compatible stone sealer before applying, following its label. Clean with a pH-neutral stone cleaner; avoid acid washes.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.