Granite
Sesame White
Sesame White Granite features a white to light-grey base with fine black and grey speckling.
Made in China | Flamed finish |100% Natural Stone
COLOR
EDGE
Flamed & Washed
FINISH
Flamed & Washed
THICKNESS
SIZE
Production description
Sesame White Granite features a white to light-grey base with fine black and grey speckling. Its flamed and washed finish adds texture while keeping the overall look bright and neutral. A versatile choice for patios, courtyards and garden paths, it pairs well with both contemporary architecture and traditional landscaping.
Granite has a naturally crystalline structure, with small mineral details and tonal changes that give the surface visual depth. Its architectural character works well beside timber, rendered walls and garden planting. Blend pieces from several packs during installation to distribute the natural variation across the completed project.
Choose the available size and thickness to suit the layout and installation method. Larger pieces create fewer visible joints, while smaller formats can offer more flexibility around edges and changes in shape. Plan the setting-out lines, grout colour and perimeter cuts together to achieve a balanced finished surface.
Natural stone benefits from an installation and maintenance system selected for the material and intended location. Confirm substrate preparation, drainage, jointing and sealing requirements with your installer. Use a cleaner suitable for the stone, clean spills promptly and avoid unapproved acidic or abrasive products. Request a sample to assess colour and texture before ordering; samples indicate the general appearance and cannot represent every piece in a complete delivery.
Specs & Information
- Material: Natural granite
- Format: Stone paving / tiles
- Finish: Flamed and washed
- Size options: 300 × 600 mm, 400 × 800 mm, 600 × 600 mm
- Thickness options: 20 mm
- Sales unit: m²
- Typical use: Patios, courtyards and paths; suitability depends on finish, thickness and installation
- Natural variation: Shade, markings, texture and nominal dimensions can vary between pieces.
- Wet-area suitability: Confirm slip suitability for the selected finish and project; no test rating is stated here.
Installation
1. Check and plan
Inspect the stone before laying. Blend pieces from several packs and dry-lay a small area to check colour, joints and cuts.
2. Prepare the base
Have your installer provide a sound, clean base suited to the stone thickness and expected loads. Outdoor areas need drainage falls; thin tiles require a supported bonded installation.
3. Lay with full support
Use a stone-compatible adhesive or bedding system. Support the whole underside, including edges and corners; avoid isolated blobs. Check coverage by lifting an occasional piece.
4. Joint and clean
Allow the specified joints and movement joints. Grout with a compatible product and clean residue promptly. Follow the chosen system for any pre-grout sealing.
5. Cure and seal
Let the adhesive and grout cure before use. Test a compatible stone sealer before applying, following its label. Clean with a pH-neutral stone cleaner; avoid acid washes.
Format & Sizing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.


